Do you know anything about the painting production line?

 With the development of economy, more and more products are required to beautify the appearance of products through spraying processing, and spraying processing has also changed from manual spraying to Automatic Spraying Line processing. So what matters should be paid attention to when working on the spraying production line? Richfruits Automatic Spraying Line factory will introduce to you.

1. Pay attention to the mounting of the sprayed object during the spraying production line to ensure that the object is in position during the spraying process. The plane of the sprayed object should be close to straight. The other planes and the level are at an angle of 10-40 degrees, so that the surface of the sprayed object can be Flow out more smoothly.

2. During the spraying production line operation, avoid solvent dispersion in the workshop and dust falling into the paint tank. The paint tank should be maintained.

3. After the large objects are sprayed on the spray production line, they should be sent into the roasting barn after the solvent has basically evaporated.

4. Pay attention to the measurement of paint viscosity when spraying production. If the viscosity increases more than 10% of the original viscosity, the solvent should be added in time. When adding solvent, the spraying operation should be stopped, waiting for uniform mixing, and after the viscosity is qualified, the spraying operation should continue.

5. The thickness of the paint film should be produced according to the customer's requirements. According to different equipment, the experiment confirms the appropriate rate of increase. Increase the sprayed objects uniformly according to the rate.

6. When working in the spraying production line, strengthen ventilation equipment to avoid the harm caused by solvent evaporation, pay attention to the installation of fire protection equipment and check it regularly.